BLGSC - FOREX 1301
- MSDS: BLGSC
- Manufacturer: ATOCHEM NORTH AMERICA
- Product Name: FOREX 1301
- National Stock Number: 6830-00N019492
Product Identification
Product ID:FOREX 1301
MSDS Date:06/01/1989
FSC:6830
NIIN:00N019492
MSDS Number: BLGSC
Responsible Party
PHILADELPHIA, PA 19102
US
Emergency Phone: 215-582-1551 800-424-9300(CHEMTREC)
Info Phone: 800-633-6971
Cage: 0M6C4
Contractor
Telephone: 800-633-6971
Cage: 0M6C4
Ingredients
TRIFLUOROBROMOMETHANE (HALON 1301) (SARA III)
CAS: 75-63-8
RTECS: PA5425000
Fraction By Weight: 100%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:CONTACT WITH LIQUID CAN CAUSE
"FREEZER" BURNS. SKIN:CONTACT WITH LIQUID CAN CAUSE FROSTBITE.
INGEST:MILDLY TOXIC BY INGESTION, AFFECTING CENTRAL NERVOUS SYSTEM.
INHAL:AT CONCENTRATIONS >20, 000 PP M IRREGULARITIES IN CENTRAL
NERVOUS SYSTEM AND CARDIAC MUSCLE ARE EXHIBITED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ANEMIA, ASTHMA, DERMAL SENSITIVITY
AND LOW BLOOD PRESSURE.
First Aid
First Aid:EYES:IMMED FLUSH W/FLOWING H2O FOR @ LST 15 MIN. SEE PHYS IF
IRRIT PERSISTS. SKIN:REMOVE CONTAMD CLTHG & WASH EXPOSED SKIN W/LG
AMT OF H2O. SEE PHYS IF IRRIT PERSISTS. INGEST:FOR LG AMT INGESTED,
INDU CE VOMIT W/IPECAC. DO NOT INDUCE VOMIT IF PERSON IS COMATOSE.
SEE PHYS. INHAL:NO HARMFUL EFTS ARE ANTICIPATED FROM BRTHG LOW CONC
OF VAP FOR SHORT PERIOD OF TIME. IF PROBLEM DEVELOPS,
REMOVE(SUPDAT)
Fire Fighting
Extinguishing Media:NON-FLAMMABLE. MEDIA SUITABLE FOR SURROUNDING FIRE
.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MOVE CONTAINER FROM FIRE AREA, IF
POSSIBLE. COOL FIRE EXPOSED CONTAINERS WITH WATER WELL AFTER FIRE
IS OUT TO PREVENT POSSIBLE EXPLOSIONS.
Accidental Release
Spill Release Procedures:VENT AREA & REMOVE ALL IGNITION SOURCES.
CONTAIN SPILL BY BLDG DIKE USING ABSORBENT MATERIAL. COLLECT
REMAINDER OF SPILL W/ABSORBENT MATERIAL & PLACE MATERIAL INTO DRUM
APPROVED FOR WASTE DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:MINIMIZE VAPORIZATION BY SEALING IN
TIGHTLY CLSD CONTR. STORE IN COOL, WELL-VENTD AREA. KEEP AWAY FROM
HEAT/SPARKS/OPEN FLAMES. AVOID EYE/SKIN(SUPDAT)
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD RESPIRATOR FOR DUST MIST/FUMES
APPROPIATE TO AIRBORNE CONC MAY BE WORN. NIOSH/MSHA APPROVED
ORGANIC RESPIRATOR SUITABLE TO AIRBORNE CONCENTRATIONS IS
RECOMMENDED.
Ventilation:PROVIDE LOC EXHAUST VENT WHERE BUILD-UP OF VAP MAY EXCEED
LISTED PEL/TLV IN WORK BRTHG ZONES. FOLLOWING (SUPP DATA)
Protective Gloves:NITRILE/NATURAL RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:TO DECOMP OF PROD MAY BE GENERATED DURING FIRE. FIRST
AID PROC:PERSON TO FRESH AIR & SUPPLY O2 IF NEC. HNDLG/STOR PREC:
CONT. WHEN TRANSFERRING FROM CONTR, GROUND & BOND BOTH CONTR. VE
NT:PUBLICATION OFFERS VENT GUIDELINES &TECHNIQUES: "INDUSTRIAL
VENT, MANUAL OF RECOM PRACTICE" AVAILABLE FROM ACGIH.
Chemical Properties
HCC:G3
Boiling Pt:B.P. Text:-72F,-58C
Melt/Freeze Pt:M.P/F.P Text:-270F,-168C
Vapor Pres:220PSIG
Vapor Density:5.14
Spec Gravity:1.54
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, LIQUIFIED GAS, WITH SLIGHT ETHEREAL ODOR.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
ALKALINE EARTH METALS, ALKALI, POWDERED ALUMINUM, ZINC, BERYLLIUM.
Stability Condition to Avoid:EXPOSURES TO FLAMES OR HOT SURFACES ABOVE
850F.
Hazardous Decomposition Products:HYDROBROMIC/HYDROFLUORIC ACIDS, POSS
FREE HALIDES & CARBONYL HALIDES. IRRITATING &/OR TOX GASES
DUE(SUPDAT)
Disposal
Waste Disposal Methods:RECOVERED MATERIAL CAN BE INCINERATED IN A
FURNACE WHERE PERMITTED, OBSERVING ALL LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.